Nintendo GameCube Console
Choose whether you want to have the GCDual HDMI & RGB mod, Capacitors Replaced, Noise Blocker Fan Kit, Colored Power LED and/or a GCLoader w/ SD Card Mount.
All consoles/controllers are in similar condition as pictured. Console and accessories are lightly cleaned on the outside of the console. We disinfect according to the latest CDC guidelines and thoroughly test our consoles to ensure you receive a well working machine. These consoles are used condition so may come with minor wear with little to no yellowing.
Please use high quality RGB cables to get the most of out of this console. I recommend getting your RGB SCART/Component cables from the following websites below.
1 x GameCube Console Only
Will ship 3-4 weeks not including weekends and holidays
GCDual HDMI & RGB
This ultimate mod to get the best video quality from your GameCube. This adds a mini HDMI port to your GameCube outputting a clean digital 480p signal. It also adds RGB output from the GameCube analog port enabling you the option to output both RGB and HDMI at the same time! This is also powered by the well known GCVideo software. Will come with the latest firmware installed.
GCLoader w/ SD Card Mount
GCLoader is an Optical Drive Emulator(ODE) or SD Card reader that replaces the disc drive. It basically functions the same as an Everdrive or Flashcart. It allows faster load times than the stock disc drive and makes your console region free! Original Devs of GCLoader HERE and HERE
This PCB allows a MicroSD card to be inserted into the serial port2 of the GameCube. This is useful for saving your settings for Swiss and GCLoader.
Region Free Switch
This is a switch installed to swap the console to USA and Japanese modes. Remember to have a separate Memory Card for each region. Your memory card will become corrupted if you save USA and Japanese games to the same memory card.
This modchip enables your GameCube to play backup discs
Noise Blocker Fan Mod
This mod replaces the stock fan with a quieter fan that also cools your console better.
We can change your Power LED indicator color to either color changing RGB, or static colors such as blue, green, yellow, red, or white!
Full Recap with New Capacitors
If you want a fully restored console making it basically new again, choose to have all the capacitors replaced. Capacitors in all electronics general lifespan is about 25-30 years until they start to dry up. When this happens your consoles audio and/or video will begin to degrade and even worse fail to power on anymore. Replacing capacitors is preventative maintenance and a good investment to keep your consoles or electronics working up to spec for several more years.
Full Service Wash and Polish
Console/controller gets a complete inside and out cleaning in warm soapy water. After they're dried they're polished with 303 UV Protectant coating to give a brand new shine and protection against dirt, dust and UV.
Powr Up Gaming provides a 30 Day Return Policy and 90 Day Warranty on all products and services. This return policy is only granted for defects and/or failures in terms of product or alteration/modifications within this period. Please see our full Warranty and Return Policy HERE
When purchasing a service, return shipping cost will be charged upfront at checkout. All consoles are subject to a 3-4 week turn-around time. Please note that the turn-around time isn't strictly limited to 3-4 weeks. Consoles must be sent to me in fully operational order and in a sanitary state. Consoles that are sent to me in an unsanitary state such as but not limited to insect infestation will be charged an additional fee.
All other products sold such as "PreModded Made to Order" products are typically shipped within 3-4 weeks. However, depending on volume, orders may take several days to ship.